Description
Our Yorkshire Terrier Dog Bath Bomb Mold is printed using 3D printing technology. The sandwich-type mold makes it easy to press adorable Yorkshire Terrier bath bombs quickly and easily!
All mold designs are tested with different bath bomb recipes before being listed, and each mold is inspected before shipping it out.
SPECS:
Yorkshire Terrier Dog Bottom Piece
Yorkshire Terrier Dog Top piece
Yorkshire Terrier Dog Bath Bomb Cylinder
Available sizes: 2.5" | 3" | 3.5" | 4" | 4.5"
HOW TO USE
–Place the cylinder on a surface and slide the bottom half of the mold in.
–Fill to the top of the outer ring with your bath bomb mixture, don’t pack it in.
–Then press the top half of the mold into the outer ring.
–Push the top mold on and press it down.
–Move the cylinder up and down and slide it out.
–Tap lightly around the mold and slowly pull off the top half and then the bottom half and
–lay the bath bombs out to dry for 24 hours before packaging.
–This three-piece press allows you to shape a perfect Yorkshire Terrier Dog with whichever size
“Saturn ring” you prefer.
WARM NOTE:
I use top-grade PLA PRO+ for our molds. I take the pro over the regular one WITHOUT additional charges so you can enjoy the best quality molds. Colors vary based on our filament supply and choice, though we generally use black. All mold designs are tested with different bath bomb recipes before being listed, and each mold is inspected before shipping it out.
CARE INSTRUCTIONS
The PLA is heat-sensitive. So all cleaning must be done using cold water, and never in the dishwasher. Store the molds indoors and never in a hot shed or car as it can cause the molds to warp. In addition, make sure not to soak them as the molds can hold water between the PLA fibers.
All mold designs are tested with different bath bomb recipes before being listed, and each mold is inspected before shipping it out.
SPECS:
Yorkshire Terrier Dog Bottom Piece
Yorkshire Terrier Dog Top piece
Yorkshire Terrier Dog Bath Bomb Cylinder
Available sizes: 2.5" | 3" | 3.5" | 4" | 4.5"
HOW TO USE
–Place the cylinder on a surface and slide the bottom half of the mold in.
–Fill to the top of the outer ring with your bath bomb mixture, don’t pack it in.
–Then press the top half of the mold into the outer ring.
–Push the top mold on and press it down.
–Move the cylinder up and down and slide it out.
–Tap lightly around the mold and slowly pull off the top half and then the bottom half and
–lay the bath bombs out to dry for 24 hours before packaging.
–This three-piece press allows you to shape a perfect Yorkshire Terrier Dog with whichever size
“Saturn ring” you prefer.
WARM NOTE:
I use top-grade PLA PRO+ for our molds. I take the pro over the regular one WITHOUT additional charges so you can enjoy the best quality molds. Colors vary based on our filament supply and choice, though we generally use black. All mold designs are tested with different bath bomb recipes before being listed, and each mold is inspected before shipping it out.
CARE INSTRUCTIONS
The PLA is heat-sensitive. So all cleaning must be done using cold water, and never in the dishwasher. Store the molds indoors and never in a hot shed or car as it can cause the molds to warp. In addition, make sure not to soak them as the molds can hold water between the PLA fibers.
Standard shipping to the USA & CANADA usually takes 12-20 business days.
👉 Upgrade your shipping to EXPRESS and get it faster! (2-7 b.days) - available on checkout.
👉 DHL 1-3 days shipping is also available on checkout
This product will take 1-6 business days to dispatch
I do accept exchanges. We do not offer refunds or cancellations on any orders. If you have any issues with any item, please contact me directly, and I will work with you. If you have any quality issues, please contact me dir